A robot camera phone is set for a March 1 reveal at MWC Barcelona 2026. Honor has confirmed the date and a pop-up AI camera assistant, but specs, pricing, and availability are still unknown.

The post A phone with a pop-up robot camera is launching soon appeared first on Digital Trends.

The researcher who discovered the vulnerability saw more than 2,500 internet-exposed devices.

The post TP-Link Patches Vulnerability Exposing VIGI Cameras to Remote Hacking appeared first on SecurityWeek.

For many of us, having remote access to our smart homes over the internet is non-negotiable. But is this really necessary? And more to the point, is there anything to be gained from not doing so?

Most people don’t upgrade home security because they love shopping for cameras. They do it because they want fewer blind spots, clearer footage, and a setup that doesn’t become a weekly chore. This Arlo Ultra Outdoor Security Camera bundle gives you three wireless 4K HDR cameras plus a charging station, and it’s priced at $399.99, […]

The post Cover more of your property for less with this discounted Arlo 3-camera kit appeared first on Digital Trends.

If you're new to setting up security cameras from scratch, the task of home security can seem daunting. But luckily, you can have a trial run with free-to-use security camera apps that only require your phone and one spare device that you probably have on hand.

Living without standard utility hookups like electricity, Internet, water, and sewer comes with a whole host of challenges, all of which are most commonly solved by spending lots of money. For electricity, a solar array or a generator is fairly common. The Internet can similarly be accessed via a satellite link if wires aren’t available. For water, most people will drill a well, but that gets similarly expensive. [Cranktown City] recently bought an off-grid home and needed a way to get water to it on a budget, so he built this water trailer instead.

The trailer started off as a standard single-axle utility trailer. The weight rating was probably around 3,500 pounds or 1588 kg. A few support structures were welded in. The supports serve double duty as a frame for two IBC totes, which can hold about 550 gallons or 2082 liters of water. The trailer also got upgraded wiring, including some extra wires to support a backup camera. The two totes were then plumbed together with a ball valve for an outlet. That valve was mated to a motor that can be remotely activated from within a truck to dump the water out into a cistern.

On the cistern side, [Cranktown City] welded up a door with a linear actuator and a remote control. When he’s ready to dump the water into the cistern, he can easily back up the trailer using the backup camera, open the door to the cistern remotely, and then activate the ball valve on the trailer to start filling the reservoir. It’s a clever solution to bringing water to his off-grid property at a fraction of the cost of a drilled well. We’ve seen some other unique ways to live off-grid as well,  like this hydroelectric generator, which might offset the cost of an expensive solar array.

There’s an old adage in photography that the best camera in the world is the one in your hand when the shot presents itself, but there’s no doubt that a better camera makes a difference to the quality of the final image. Among decent quality cameras the Leica rangefinder models have near cult-like status, but the problem is for would-be Leica owners that they carry eye-watering prices. [Cristian Băluță] approached this problem in s special way, by crafting a Leica-style body for a Panasonic Lumix camera. Given the technology relationship between the Japanese and German companies, we can see the appeal.

While the aesthetics of a Leica are an important consideration, the ergonomics such as the position of the lens on the body dictated the design choices. He was fortunate that the internal design of the Lumix gave plenty of scope for re-arrangement of parts, given that cameras are often extremely packed internally. Some rather bold surgery to the Lumix mainboard and a set of redesigned flex PCBs result in all the parts fitting in the CNC machined case, and the resulting camera certainly looks the part.

The write-up is in part a journey through discovering the process of getting parts manufactured, but it contains a lot of impressive work. Does the performance of the final result match up to its looks? We’ll leave you to be the judge of that. Meanwhile, take a look at another Leica clone.

Security researcher Jon “Gainsec” Gaines and YouTuber Benn Jordan discuss their examination of Flock Safety’s AI-powered license plate readers and how cost-driven design choices, outdated software, and weak security controls expose them to abuse.

The post AI Surveillance: Unmasking Flock Safety’s Insecurities appeared first on The Security Ledger with Paul F. Roberts.

💾

Zimperium zLabs reveals DroidLock, a new Android malware acting like ransomware that can hijack Android devices, steal credentials via phishing, and stream your screen via VNC.