Reading view

There are new articles available, click to refresh the page.

Smoked Tomahawk Ribeye on the Pellet Grill

Smoked Tomahawk Ribeye on the Pellet Grill

This 3-pound tomahawk ribeye went straight on the pellet grill—no reverse sear, no cast iron finish. Just steady smoke and low heat all the way through. I figured it might miss that crust, but the right layer of seasoning and patience built up the perfect color. The result? Juicy, tender, medium-rare perfection with a buttery jus from the rest. Proof you can cook a tomahawk start to finish on a pellet grill and still pull off a true steakhouse-quality ribeye.

WHAT MALCOM USED IN THIS RECIPE:

Smoked Tomahawk Ribeye On The Pellet Grill Recipe

Print
Smoked Tomahawk

Smoked Tomahawk Ribeye on the Pellet Grill


5 Stars 4 Stars 3 Stars 2 Stars 1 Star

No reviews

Description

Smoked tomahawk ribeye cooked start-to-finish on the pellet grill. No sear, just low heat, rich smoke, and juicy medium-rare steakhouse flavor every time.


Ingredients

  • 1 Tomahawk Ribeye Steak (about 3 lbs)
  • 2 Tbsp Worcestershire sauce
  • 2 Tbsp Willingham’s W’ham Original Mild Seasoning
  • 12 Tbsp Killer Hogs AP Seasoning (salt, pepper, garlic)
  • 12 Tbsp Killer Hogs Steak Rub (for texture & color)
  • ½ stick (4 Tbsp) unsalted butter, cut into pats

Instructions

  1. Trim the Steak
    Lightly trim any big pockets of fat around the edges and clean up the bone for presentation.
  2. Season Generously
    Rub the steak all over with Worcestershire sauce as a binder.
    Apply a medium coat of W’ham Original Mild Seasoning for color and base flavor.
    Add a layer of Killer Hogs AP Seasoning to build that salt, pepper, garlic profile.
    Finish with a layer of Killer Hogs Steak Rub for texture and crust.
  3. Rest & Fire Up the Grill
    Let the steak sit out while you fire up your pellet grill to 250°F. This gives the seasonings time to melt in and lets the steak come up to room temperature before cooking.
  4. Smoke the Tomahawk
    Place the steak on the pellet grill and insert a probe thermometer into the thickest part.
    Set your first target internal temp to 120°F.
    Once it hits 120, reset your probe to 128°F and monitor closely.
  5. Rest with Butter
    Place pats of butter and a light sprinkle of Steak Rub on a platter.
    Remove the steak from the grill at 128°F and place it directly on butter.
    Tent loosely with foil and rest for 10 minutes.
  6. Slice & Serve
    Remove the steak from the bone, then slice across the grain. The melted butter and drippings combine to make a rich, flavorful sauce—spoon that over the slices before serving.

That’s how you nail a tomahawk on the pellet grill—low heat, good smoke, and plenty of patience. Slice it up, drizzle that buttery rest over the top, and you’ve got steakhouse flavor right in your backyard.

Malcom Reed
Connect on Facebook
Follow me on TikTok
Subscribe to my YouTube Channel
Follow me on Instagram

Buy Killer Hogs Products Here

The post Smoked Tomahawk Ribeye on the Pellet Grill appeared first on HowToBBBQRight.

Open Fire Tri Tip

Open Fire Tri Tip

I’m not trimming… I want to keep all the fat on this Tri Tip for flavor. Smother it in TX Brisket Rub (or classic salt & pepper), drop it straight over glowing coals on a Santa Maria grill—press it into the grate to carve a deep sear. Flip every few minutes. Then lift it to indirect heat until the probe reads 125–130°F. Twenty-minute rest, slice against the grain; simplicity and smoke rule.

WHAT MALCOM USED IN THIS RECIPE

Print
open fire tri tip

Open Fire Tri Tip


5 Stars 4 Stars 3 Stars 2 Stars 1 Star

No reviews

Description

Cook tri-tip Santa Maria-style right over the coals for big flavor and a smoky crust. This open-fire tri-tip recipe keeps it simple—just bold seasoning, live fire, and a juicy medium-rare finish.


Ingredients

  • 1 whole Tri-Tip roast (untrimmed)
  • Killer Hogs TX Brisket Rub (or salt and coarse black pepper)

Instructions

  1. Don’t Trim a Thing
    Leave all the fat and sinew on that big, beautiful tri-tip. That’s how Mr. Al Frugoni—the king of live fire—does it, and we’re sticking to it.
  2. Season Heavy
    Hit it generously with TX Brisket Rub (or your favorite salt & pepper blend). Don’t be shy—we want a big crust.
  3. Build the Fire
    Start a fire using wood splits and lump charcoal. Once you’ve got a solid coal bed, rake the coals under your cooking grate and let it heat up.
  4. Sear Over High Heat
    Place the tri-tip directly over the hot coals and press it into the grate for good contact. Flip every 3–4 minutes to build a deep sear and bark on both sides.
  5. Finish Over Medium Heat
    Once seared, move it a bit higher above the coals or to indirect heat. Keep flipping every few minutes until the internal temp hits 125–130°F for medium-rare.
  6. Rest and Slice
    Let it rest for 20 minutes. Then slice it against the grain—split it down the middle crook first, since the grain runs different ways.

 

This tri-tip is all about cooking beef the old-school way—over a live fire. Season it heavy with salt and pepper, then drop it straight over hot coals on a Santa Maria grill to build that smoky crust. Flip it often, ease it up off the heat, and cook to a juicy medium-rare. Rest it, slice it thin against the grain, and you’ve got bold flavor, tender beef, and a recipe built for the backyard fire pit or grill.

Malcom Reed
Connect on Facebook
Follow me on TikTok
Subscribe to my YouTube Channel
Follow me on Instagram

Buy Killer Hogs Products Here

The post Open Fire Tri Tip appeared first on HowToBBBQRight.

How To Grill a Ribeye Steak

Grilled Ribeye Steak

This is how I grill a ribeye steak. Sometimes I change out the flavors and seasonings… and you can too… but this is my tried and true technique I use for getting a perfectly juicy ribeye – with all the flavor!

WHAT MALCOM USED IN THIS RECIPE

A good ribeye steak deserves the right treatment, and I’m showing you exactly how to grill it up right! We’re seasoning it with a bold rub, cooking it over red-hot coals for a killer crust, and making sure it’s perfectly juicy from edge to edge.

Whether you like it medium-rare or a little more done, this method locks in all the flavor and gives you steakhouse-quality results every time!

Malcom Reed
Connect on Facebook
Follow me on TikTok
Subscribe to my YouTube Channel
Follow me on Instagram

Buy Killer Hogs Products Here

The post How To Grill a Ribeye Steak appeared first on HowToBBBQRight.

Beef Flanken Ribs

Beef Flanken Ribs

Flanken Ribs have a rich, beef flavor – and when you take the time to marinade them and then chargrill them directly over hot coals, you get a delicious bite of beefy goodness!

For this recipe I went with an Asian inspired marinade… but you could go with any flavors. You could glaze them with a sauce at the end… get real creative with this recipe.

 

WHAT MALCOM USED IN THIS RECIPE:

Print
Beef Flaken Ribs

Beef Flanken Ribs


5 Stars 4 Stars 3 Stars 2 Stars 1 Star

No reviews

Description

Grilled Beef Flaken Ribs – Flaken Ribs have a rich, beef flavor – and when you take the time to marinade them and then chargrill them directly over hot coals, you get a delicious bite of beefy goodness!


Ingredients

  • 4lbs flanken-cut beef ribs
  • 1 bunch green onions – chopped divide the green and white parts
  • 2 heaping teaspoons minced garlic
  • 2 teaspoons minced ginger
  • 1/4 cup soy sauce
  • 1/4 cup worcestershire sauce
  • 1/8 cup balsamic vinegar
  • 2 Tablespoons Hoisin sauce
  • 1 Tablespoon Killer Hogs TX Rub

Instructions

  1. Place the white parts of the onion in a mixing bowl and add: minced garlic, ginger, soy, worcestershire, balsamic vinegar, hoisin, and TX. Stir to combine.
  2. Add the beef flanken cut ribs to a large ziplock bag and pour in the marinade. Squeeze the air out of the bag and gently toss the ribs around so everything is coated in the marinade. Place the bag in the refrigerator for at least an hour.
  3. Prepare a grill for 2 zone cooking – hot side and cool side. Grill the ribs over the direct heat zone (hot side) of the grill. Work in batches so the grill isn’t over crowded. Cook the ribs on each side until they begin to char about 3-4 minutes each side. Then move them over to the cool zone until all of the ribs are char-grilled.
  4. Place the ribs on a foil lined baking sheet, wrap the foil around the top to seal off the heat, and rest the ribs for 20-30 minutes.
  5. To serve place the ribs on a large cutting board or platter and top with the green tops of the onions.

Malcom Reed
Connect on Facebook
Follow me on TikTok
Subscribe to my YouTube Channel
Follow me on Instagram

Buy Killer Hogs Products Here

The post Beef Flanken Ribs appeared first on HowToBBBQRight.

Garlic Butter Filet Mignon

Garlic Butter Filet Mignon

I started with a Whole Beef Tenderloin, then trimmed it into Filet Mignon Steaks – but you can start with Filet Mignon Steaks straight from the meat counter. To cook these steaks, I used a reverse-seared on a charcoal grill and brought them up slowly to nail the doneness. Then I moved them directly over the coals and basted with Garlic Butter while these Filets got flame-kissed over open flames.

 

 

WHAT MALCOM USED IN THIS RECIPE:

I started with a whole beef tenderloin, trimmed it myself – because they are a little cheaper and you end up with extra meat for other recipes too. After I trimmed these filets into thick steaks, I seasoned them simply – but not lightly – and set up my Primo Grill for a two-zone fire.

Started the steaks out slow on the indirect side and when they hit 115 internal I seared them directly over the hot coals and basted them with garlic butter. I like them medium rare, so I only seared them for 1-2 minutes each side (basting them with the garlic butter the whole time). Took them off, let them rest and these were some of the best steaks I’ve ever cooked!

Print
GARLIC BUTTER FILET MIGNON

Garlic Butter Filet Mignon


5 Stars 4 Stars 3 Stars 2 Stars 1 Star

No reviews

Description

Whole Beef Tenderloin trimmed into Filet Mignon Steaks and cooked with a reverse-seared – then basted with a Garlic Butter while they get flame-kissed over open flames


Ingredients

  • 512oz Beef Tenderloin Filets (AKA – Filet Mignon Steaks)
  • 1/4 cup Worcestershire Sauce
  • 1/2 cup Killer Hogs TX Brisket Rub
  • 1 Tablespoon olive oil
  • 8 cloves garlic minced
  • 1 shallot minced
  • 2 sticks salted butter
  • 1 Tablespoon chopped parsley

Instructions

  1. Drizzle the outside of each steak with worcestershire sauce and season heavily with TX Rub (coarse salt and black pepper can substitute).
  2. Set up a grill for 2 zone cooking – hot and cool side.  I used my primo ceramic grill running Royal Oak Lump charcoal but any grill will work.
  3. Keep the grill between 275-300°F for the first stage of the reverse sear. Place a probe thermometer in the center of one of the filets and set each steak on the cool side of the grill to start away from the direct fire.
  4. Once the internal temperature reaches 115°F – about 25 minutes; remove the steaks from the grill and place on a foil lined sheet pan. Rest the steaks for about 15-20 minutes. You will notice the temp continues to climb but it will eventually stop and start to drop. This is where you want to do the sear stage.
  5. While the filets are resting – add a drizzle of olive oil to an iron skillet. Add the garlic and shallot and saute until soft – season with a little TX rub for flavor.
  6. Move the skillet off the direct heat and add the butter. Stir until the butter melts about 2 minutes and add the chopped parsley.
  7. Brush each filet with the butter mixture and place over the direct heat (Fire side) of the grill for 1 minute on each side.  Continue brushing with butter at this point and only cook until a char starts to form.  It should take about 1-2 minutes total each side.  It is important to not walk away and be extremely careful at this point because the fire will be rolling.
  8. Remove the steaks from the grill once seared and brush with additional garlic butter.  Rest the steaks for 5 minutes and serve.

 

Malcom Reed
Connect on Facebook
Follow me on TikTok
Subscribe to my YouTube Channel
Follow me on Instagram

Buy Killer Hogs Products Here

The post Garlic Butter Filet Mignon appeared first on HowToBBBQRight.

WalMart Prime Rib

WalMart Prime Rib

WalMart Prime Rib

For this recipe I picked up a nice, boneless, 5lb Prime Rib Roast from WalMart for about $66… and I turned it into something that is worthy of that Holiday Table. I seasoned it with beefy flavors, garlic and onions and then smoked it on a pellet smoker with Hickory pellets until it was medium rare (120 internal).

WHAT MALCOM USED IN THIS RECIPE: Print

WalMart Prime Rib


Description

Smoked Prime Rib cooked with an herb-crust on the Pellet Smoker using Hickory Pellets.


Ingredients


Instructions

  1. Prepare pellet grill for indirect smoking at 250°F using hickory pellets.
  2. Trim excess fat from prime rib roast and use butcher twine to secure the shape of the roast.
  3. Mix together Killer Hogs TX Brisket Rub, Chimi Churri, Garlic and Onion in a small bowl. 
  4. Drizzle the outside with olive oil for a binder. Season with a layer of Swine Life Prime Beef Rub. Then generously rub the outside of the prime rib roast with the TX Brisket seasoning mixture. 
  5. Place the prime rib on the smoker – use an internal meat probe to monitor internal temps. When temperature in the center of the roast reaches 120°F, remove from smoker and allow prime rib to rest for at least 20-30 minutes before slicing.

Keywords: prime rib, prime rib roast, walmart meat, walmart prime rib, smoked prime rib, prime rib on the grill, how to smoke a prime rib

Have a Question About This Recipe?

Connect with us in our HowToBBQRight Facebook group for recipe help, to share your pictures, giveaways, and more!

The post WalMart Prime Rib appeared first on HowToBBBQRight.

Smoked Beef Tenderloin

Smoked Beef Tenderloin

Smoked Beef Tenderloin on Pellet Grill

Smoking a beef tenderloin this way gives new meaning to “steak dinner”. When I was thinking about what meal I’d want for Father’s Day this year… I just wasn’t feeling ribeye… But I was feeling a perfectly smoked Beef Tenderloin, cut into filet-sized pieces, and served with some Beefy Smoked Mushrooms. WHAT MALCOM USED IN THIS RECIPE: Print

Smoked Beef Tenderloin


Description

Beef Tenderloin slow smoked on the pellet grill alongside some beefy, smoked mushrooms. Perfect for a different, delicious take on steak night.


Ingredients

  • 1 whole beef tenderloin
  • 2 Tablespoons Worcestershire Sauce
  • 1 Tablespoon Killer Hogs AP seasoning
  • 2 Tablespoons Traeger Saskatchewan Seasoning (or your fave blackened rub)

Beefy Smoked Mushrooms

  • 3 pints sliced mushrooms
  • 1 shallot finely chopped
  • 56 cloves garlic minced
  • 1 cup red wine
  • 1 cup beef broth
  • 1 Tablespoon Kitchen Accomplice Beef Broth Concentrate
  • 1/2 stick butter
  • 2 teaspoons Killer Hogs AP Seasoning
  • Place all ingredients into a smoker-safe dish or a half size aluminum pan. Smoke on pit for 1.5 – 2 hours until mushrooms and garlic are tender.

Instructions

  1. Trim the whole beef tenderloin into center cut portion be sure to remove any sinew or silver skin.
  2. Prepare pellet grill or any other smoker for indirect smoking at 250 degrees.
  3. Drizzle the outside of the tenderloin with Worcestershire for a binder and season with a layer of AP seasoning followed by the Saskatchewan seasoning.
  4. Place the tenderloin on the smoker, insert a probe thermometer into the center of the roast and smoke until internal temperature reaches 120 degrees.
  5. Remove the tenderloin from the pit and cover loosely in foil and rest for 20-30 minutes.
  6. Slice the tenderloin into desired thickness and serve.

Keywords: smoked beef tenderloin, beef tenderloin, beef tenderloin recipe, pellet grill, Beef tenderloin on a pellet grill, pellet smoker, smoked beef tenderloin steaks, steak recipes, beef tenderloin steak, tenderloin steak

Malcom Reed Connect on Facebook Follow me on TikTok Subscribe to my YouTube Channel Follow me on Instagram

Have a Question About This Recipe?

Connect with us in our HowToBBQRight Facebook group for recipe help, to share your pictures, giveaways, and more!

The post Smoked Beef Tenderloin appeared first on HowToBBBQRight.

Smoked Porterhouse Steak with Bacon Tallow Butter

Smoked Porterhouse Steak with Bacon Tallow Butter

Smoked Porterhouse Steak with Bacon Tallow Butter

Porterhouse Steak smoked on a Drum Smoker and topped with Bacon Tallow Butter – A steak like this can make anyone happy… WHAT MALCOM USED IN THIS RECIPE: Print
Smoked Porterhouse Steak

Smoked Porterhouse Steak with Bacon Tallow Butter


Description

Porterhouse Steak smoked and topped with Bacon Tallow Butter


Ingredients


Instructions

  1. Prepare drum smoker for indirect cooking at 275°F using lump charcoal for fuel.
  2. Drizzle each side of the porter house steaks with olive oil to lightly coat and season with a layer of Prime Beef rub followed by the Steak Rub. Allow the steaks to rest at room temperature for 20 minutes.
  3. Place the steaks on the smoker and insert a probe thermometer into the center of one steak to monitor internal temp.
  4. Smoke the steaks until the internal temperature reaches about 118° flipping half way through for even cooking.
  5. Take half of the bacon tallow/drippings and mix with 1/2 stick of melted butter. Season with a dash or two of Prime Beef and Steak Rub. Rest in the refrigerate until ready to use.
  6. Remove the lid from the drum and baste each steak with the bacon drippings. Flip the steaks and continue cooking (with the lid off to sear the steaks) until the internal temperature reaches about 125-128°F.
  7. Remove the steaks from the grill, top each with a big dollop of the bacon tallow butter and rest for 7-10 minutes before serving.

Malcom Reed
Connect on Facebook
Follow me on TikTok
Subscribe to my YouTube Channel
Follow me on Instagram

Have a Question About This Recipe?

Connect with us in our HowToBBQRight Facebook group for recipe help, to share your pictures, giveaways, and more!

The post Smoked Porterhouse Steak with Bacon Tallow Butter appeared first on HowToBBBQRight.

Smoked Easter Brisket

Smoked Easter Brisket

Smoked Easter Brisket

If you are tried of serving the same old ham for Easter Dinner every year, try a “Smoked Easter Brisket”. If it’s not already a thing… it should be! WHAT MALCOM USED IN THIS RECIPE: Print
smoked easter brisket

Smoked Easter Brisket


Description

Smoked Brisket seasoned with typical “roast” flavors and braised with wine. Once the brisket is tender, the braising liquid is used to make a Beef Onion Gravy. A recipe perfect for serving on Easter.

Ingredients

  • 1 whole brisket 13-15lbs
  • 2 Tablespoons Killer Hogs AP Seasoning
  • 1 packet Lipton Beefy Onion Soup Mix
  • 2 cups Beef Broth
  • 2 large onions sliced
  • 68 cloves garlic minced
  • 3 Tablespoons tomato paste
  • 2 cups red wine
  • 34 bay leaves
  • 1/4 cup flour
  • 1/2 stick butter

Instructions

  1. Prepare smoker for indirect cooking at 275°F using Hickory wood splits for fuel and flavor.  (Any smoker can be used for this recipe, keep the temps steady at 275°F)
  2. Trim the brisket by removing thick areas of fat and sinew from the top and bottom.  Season with AP seasoning followed by the packet of Beefy Onion soup mix. Allow the brisket to set it at room temperature for 15-20 minutes before placing it on the smoker. 
  3. Smoke the brisket at 275°F until the outside starts to turn dark about 3 1/2 – 4 hours.  At this point remove the brisket from the pit and place in a large aluminum pan.
  4. Add the beef broth, wine, tomato paste, garlic, onions, and bay leaves to the pan.  Insert a probe thermometer into the thickest part of the flat, and cover the pan with aluminum foil. 
  5. Place the brisket back on the pit and continue to cook until the probe thermometer reaches 202°F.  At this point check the brisket for tenderness.  It should feel really soft when you insert a hand held thermometer in all areas of the brisket. 
  6. Remove the brisket from the pit and carefully take it out of the braising liquid.  Place it on a sheet pan and loosely cover with aluminum foil.
  7. Pour the pan liquid through a colander to separate the onions form the liquid. Pour the liquid into a fat separator or ladle off any fat from the top of the bowl.  
  8. In a deep saute pan over medium heat add the flour and butter and stir for a few minutes to create a roux.  Slowly whisk in the separate liquid (about 2 cups) and whisk until it starts to bubble and thicken.  At this point stir in the onions and taste for seasoning.  If it needs a little salt and pepper just use a sprinkle of AP.  
  9. Slice the brisket across the grain and serve with the brisket onion gravy. 

Keywords: Easter brisket, smoked easter brisket, brisket recipe, beef brisket, smoked brisket, how to smoke a brisket, smoked brisket, offset smoker, simple brisket recipe

Malcom Reed
Connect on Facebook
Follow me on TikTok
Subscribe to my YouTube Channel
Follow me on Instagram

Have a Question About This Recipe?

Connect with us in our HowToBBQRight Facebook group for recipe help, to share your pictures, giveaways, and more!

The post Smoked Easter Brisket appeared first on HowToBBBQRight.

❌